If you are looking to solve common automotive aftermarket issues, count on us to develop superior automotive adhesives that improve on the conventional processes, replace the bulky aftereffects of punching and folding, and open the door for lightweight designs. With tighter seals and stronger bonds, our aftermarket solutions offer improved automotive repair solutions that are capable of fastening synthetic materials and can reduce noise and vibration better than other bonding procedures.
We have a broad range of automotive adhesive solutions that are engineered to help you perform tasks faster and better using the latest technologies. From methylmethacrylates (MMAs), cyanoacrylates, high-bond acrylic tapes, MS polymer-based, 1k elastic and 2k structural polyurethanes to flange sealants, threadlockers, and anaerobic and silicone sealants, we have a full line of products for a wide range of automotive aftermarket applications.
Those applications include:
- Exterior Lighting
- Engine Hood
- Roof Ditch Moldings
- Spoiler Attachment
- Product Badging
- Sheet Molded Compound
- Boot Lid Assembly
- Rear Decorative Molding
- Side Molding
- Wheel Well Flairs and Insert Attachments
- Ground Effect
- Seam Sealing
Contact us to learn more about how our automotive adhesives and sealants are transforming the automotive aftermarket.
Our Featured Automotive Aftermarket Products
1280
- 2K PU light weight foam provides for complete encapsulation of the battery cells within a module
- This provides for excellent structural enhancements and increased impact resistance
Technology | Documentation | |
---|---|---|
1280Used for battery module encapsulation |
TechnologyPU | Reactive Chemistry |
1510
- Anaerobic flange sealant - good resistance to high temperature and chemicals
- Used for sealing rigid flanges
Technology | Documentation | |
---|---|---|
1510Used for rigid flange sealing |
TechnologyAnaerobic | Anaerobic |
1515
- Anaerobic flange sealant - gneral purpose, can be used on vibriating joint surfaces
Technology | Documentation | |
---|---|---|
1515Used for rigid flange sealing |
TechnologyAnaerobic | Anaerobic |
1518
- Anaerobic flange sealant - suitable for aluminum alloy surfaces
Technology | Documentation | |
---|---|---|
1518Used for rigid flange sealing |
TechnologyAnaerobic | Anaerobic |
1581
- This is a single component RTV silicone suitable for sealing battery pack enclosures
Technology | Documentation | |
---|---|---|
1581Used for battery pack main seal |
TechnologySilicone | Silicone RTV |
1583
- Excellent electrical properties, weather stability and chemical resistance
Technology | Documentation | |
---|---|---|
1583 |
Technology |
1590
- General oxime silicone RTV for flange sealing on engines
- High eleongation and excellent chemical resistance and aging
Technology | Documentation | |
---|---|---|
1590Used for oil pan, ladder frame gaskets |
TechnologySilicone | Silicone RTV |
1592
- High remperature resistance RTV silicone sealant
Technology | Documentation | |
---|---|---|
1592Used for high temperature sealing environoments |
TechnologySilicone | Silicone RTV |
1596 Fa
- Silicone RTV for with excellent compatibility with a variety of lubricating oils and coolant
Technology | Documentation | |
---|---|---|
1596 FaUsed for engine front cover, waterpump |
TechnologySilicone | Silicone RTV |
1596Fa
- This is a single component RTV silicone suitable for general powertrain applications
- This product has excellent resistance to gear oils, lubricating oils, and anti-freeze liquids
Technology | Documentation | |
---|---|---|
1596FaUsed for general powertrain applications |
TechnologySilicone | Silicone RTV |
1598
- Silicone RTV flange sealant with excellent resistance to oils and variois chemicals
Technology | Documentation | |
---|---|---|
1598Used for general flange sealing |
TechnologySilicone | Silicone RTV |
1599
- Silicone RTV suitable for sealing rigid joints
Technology | Documentation | |
---|---|---|
1599Used for rigid flange sealing |
TechnologySilicone | Silicone RTV |
1956
- 1K PU structural adhesive for window bonding applications
- Available in 2 viscosities
Technology | Documentation | |
---|---|---|
1956Used for structural window bonding |
TechnologyPU | PU |
2061US
- 2K fire retardent 2K PU
Technology | Documentation | |
---|---|---|
2061USUsed for general potting / encapsulation |
TechnologyPU | PU |
2532
- Excellent conductivity insulation, flame retardancy, high temperature resistance
Technology | Documentation | |
---|---|---|
2532 |
Technology |
5005
- Low odor and low blooimng wicking grade
Technology | Documentation | |
---|---|---|
5005Used for medical, automotive and general assembly |
TechnologyInstant Adhesives | Reactive Chemistry |
5008
- Low odor and low blooimng wicking grade
Technology | Documentation | |
---|---|---|
5008Used for medical, automotive and general assembly |
TechnologyInstant Adhesives | Reactive Chemistry |
7012
- 1K Acrylate plus activator is an excellent thermally conductive battery module cell bonding adhesive
- Long open time but immediate fixture strength
Technology | Documentation | |
---|---|---|
7012Used for battery cell to module base bonding |
TechnologyReactive Chemistry | Thermal Conductive Adhesive |
AN06R
- High strength,thixotropic viscosity, good fatigue resistance
Technology | Documentation | |
---|---|---|
AN06R |
Technology |
AR106
- Thixotropic viscosity, high-strength sealant
Technology | Documentation | |
---|---|---|
AR106 |
Technology |
AS114
- Soft adhesive layer after curing
Technology | Documentation | |
---|---|---|
AS114 |
Technology |
Cyberbond 2240
- Rubber toughened CA provides for very fast bonding and increased impact resistance
Technology | Documentation | |
---|---|---|
Cyberbond 2240Used for insulation bonding, general bonding |
TechnologyCA | Cyanoacrylate |
EM-9002
- Something different
- A different approach to Interior trim lamination
- A Reactive Film
Technology | Documentation | |
---|---|---|
EM-9002Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyOther | Reactive PU Film |
EP832
- High strength and good toughness, heat resistance up to 150℃ in long term and 180℃ in short time,low viscosity
Technology | Documentation | |
---|---|---|
EP832 |
Technology |
EP843
- High strength, heat resistance can up to 150℃ in long term and 180℃ in short time,high viscosity
Technology | Documentation | |
---|---|---|
EP843 |
Technology |
EY1514AB
- 2k Thermally Conductive Adhesive
Technology | Documentation | |
---|---|---|
EY1514ABUsed for general potting / encapsulation |
TechnologyEpoxy | Epoxy |
FH4003AB
- General epoxy encapsulant
Technology | Documentation | |
---|---|---|
FH4003ABUsed for charger handle encapsulation, general potting |
TechnologyEpoxy | Epoxy |
FH8017M
- Underfill and edge bonding material
Technology | Documentation | |
---|---|---|
FH8017MUsed for underfill / edge bonding, battery module |
TechnologyEpoxy | Epoxy |
Isarplast® 5109
- Steering Wheels lamination specialist
Technology | Documentation | |
---|---|---|
Isarplast® 5109Used for steering wheels manual lamination |
TechnologySolvent Rubber | Solvent-based |
Isarplast® VP 509/51
- Premium Primer for foils producers
Technology | Documentation | |
---|---|---|
Isarplast® VP 509/51Used for primer for flexible foils producers |
TechnologySolven-based Primers | Solvent-based |
MS1937
- 1K modified silane adhesive and sealant provides for superior UV and ageing resistance
Technology | Documentation | |
---|---|---|
MS1937Used for sealing windows and trim parts |
TechnologyMS | STP |
NP2075VF149
- One-component
- High performance and high green strength reactive hot melt, allowing for high speed and low WIP manufacturing processes
- Excellent in-process thermal stability
- Industry leading in-lamp heat resistance performance
Technology | Documentation | |
---|---|---|
NP2075VF149Used for headlamp lens/housing bonding |
TechnologyReactive Chemistry | Reactive Hot Melt |
PD 2128
- Hi Tack acrylic PSA suitable for a variety of application including insulation, flexible ciruits, and general bonding
Technology | Documentation | |
---|---|---|
PD 2128Used for insulation bonding, general bonding |
TechnologyPSA | PSA |
PIB6510
- Excellent waterproof barrier properties,excellent UV resistance,permanent shape
Technology | Documentation | |
---|---|---|
PIB6510 |
Technology |
SN103W
- De-alcohol type, low odor, non-yellowing
Technology | Documentation | |
---|---|---|
SN103W |
Technology |
SN106FA
- Medium viscosity,low elongation, excellent gear oil resistance
Technology | Documentation | |
---|---|---|
SN106FA |
Technology |
SN106FA
- Good resistance to gear oil, lubrication oil and anti-freezing solution
Technology | Documentation | |
---|---|---|
SN106FA |
Technology |
SN107
- High elongation, good oil resistance and bonding performance
Technology | Documentation | |
---|---|---|
SN107 |
Technology |
SN595
- Low strength, IP67,easy to operate
Technology | Documentation | |
---|---|---|
SN595 |
Technology |
swift®bond 2139/1 + swift®hardener 2111
- Two-component
- Good shelf life stability
- Fogging resistance of greater than 130°C
- Excellent bond strength at greater than 120°C
- Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
- Fast green strength
Technology | Documentation | |
---|---|---|
swift®bond 2139/1 + swift®hardener 2111Used for headlamp lens/housing bonding |
TechnologyPU | Reactive Chemistry |
swift®bond 2140 + swift®hardener 2111
- Two-component
- Good shelf life stability
- Fogging resistance of greater than 130°C
- Excellent bond strength at greater than 120°C
- Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
- Slow green strength
Technology | Documentation | |
---|---|---|
swift®bond 2140 + swift®hardener 2111Used for headlamp lens/housing bonding |
TechnologyPU | Reactive Chemistry |
Swift®Bond 2846
- Best performance 1K solvent based solution for headliners and trunk lamination
Technology | Documentation | |
---|---|---|
Swift®Bond 2846Used for headliners and trunk lamination |
TechnologyPU | Reactive Chemistry |
Swift®Bond 2U010
- Two components Liquid Moisture curing for headliners construction
Technology | Documentation | |
---|---|---|
SwiftBond 2U010 |
Technology |
Swift®Bond 3U012
- One component Liquid Moisture curing for headliners construction
Technology | Documentation | |
---|---|---|
SwiftBond 3U012 |
Technology |
Swift®bond 3U115
- Meduim curing
- Adhesion to all RV components
- Extrusion grade
Technology | Documentation | |
---|---|---|
Swiftbond 3U115 |
Technology |
Swift®bond 3U117
- Fast curing
- Adhesion to all RV components
- Extrusion grade
Technology | Documentation | |
---|---|---|
Swiftbond 3U117 |
Technology |
Swift®Col 214-X
- Premium OEM's preferred solvent solution for manual lamination
Technology | Documentation | |
---|---|---|
Swift®Col 214-XUsed for interior trim laminations (intrument panels, door panels, central console ) |
Technology2K PU | Solvent-based |
Swift®Col 2411
- High heat resistance 1K Neoprene suitable for bonding Untreated PP
Technology | Documentation | |
---|---|---|
Swift®Col 2411Used for interior trim general laminations |
TechnologySolvent Rubber | Solvent-based |
Swift®Col 2415
- High heat resistance 1K Neoprene for BTR applications
Technology | Documentation | |
---|---|---|
Swift®Col 2415Used for floors flat lamination for buses and trains |
TechnologySolvent Rubber | Solvent-based |
Swift®Col 2418/1
- High heat resistance 1K Neoprene for general purposes
Technology | Documentation | |
---|---|---|
Swift®Col 2418/1Used for interior trim general laminations |
TechnologySolvent Rubber | Solvent-based |
Swift®Col 2607-XX
- Best performance Solvent Based PU with low emissions for any lamination
Technology | Documentation | |
---|---|---|
Swift®Col 2607-XXUsed for interior trim laminations (intrument panels, door panels, central console ) |
Technology2K PU | Solvent-based |
Swift®Col 4250
- High perfomance with excellent procesability for general purpose
Technology | Documentation | |
---|---|---|
Swift®Col 4250Used for soft parts laminations and foam repairments |
TechnologyPSA | Solvent-based |
Swift®Hardener 2003
- Regular catalyst for LMC's
Technology | Documentation | |
---|---|---|
Swift®Hardener 2003Used for catalyst for swift®bond solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Swift®Hardener 2005
- Special metalic catalyst with low emissions and high hidrolysis resistance
Technology | Documentation | |
---|---|---|
Swift®Hardener 2005Used for catalyst for swift®bond solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Swift®Hardener 2541
- High curing speed solvent hardener
Technology | Documentation | |
---|---|---|
Swift®Hardener 2541Used for hardener for any swift®col solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Swift®Hardener 2551
- High performance and high curing speed solvent hardener
Technology | Documentation | |
---|---|---|
Swift®Hardener 2551Used for hardener for any swift®col solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Swift®Hardener 9151
- Long pot life solvent hardener
Technology | Documentation | |
---|---|---|
Swift®Hardener 9151Used for hardener for any swift®col solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Swift®Hardener 9515
- Long pot life solvent hardener
Technology | Documentation | |
---|---|---|
Swift®Hardener 9515Used for hardener for any swift®col solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Swift®Lock 2003
- Untreated PP bonding specialist for Interior Trim lamination
- Low activation temperature and high green strength
Technology | Documentation | |
---|---|---|
Swift®Lock 2003Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2028
- High green strength with short open time
- The original
Technology | Documentation | |
---|---|---|
Swift®Lock 2028Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2028/1
- Low activation and high green strength
- Specialist in Interior Laminations
Technology | Documentation | |
---|---|---|
Swift®Lock 2028/1Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2681
- High performance PUR
- The PVC specialist for Interior Trim lamination
Technology | Documentation | |
---|---|---|
Swift®Lock 2681Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2682
- Premium/Manual lamination specialist
- Fast curing, low activation and color changing when heat activated
Technology | Documentation | |
---|---|---|
Swift®Lock 2682Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2900
- Hybrid HMMC able to bond Polar and Non Polars without surface pre-treatment
Technology | Documentation | |
---|---|---|
Swift®Lock 2900Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2914
- High green strength and wide adhesive spectrum for attachments and assemby processes
Technology | Documentation | |
---|---|---|
Swift®Lock 2914Used for attachment and assembly reactive polyurethane |
TechnologyHot Melt | Reactive Hot Melt |
Swift®Lock 2U464
- Very aggressive hot tack wiht high green strength
Technology | Documentation | |
---|---|---|
Swift®Lock 2U464Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyHot Melt | Reactive Hot Melt |
Swift®lock 2U520
- Formualted to bond lauan to FRP
- Reduces seam print
- Excellent creep resitiance in summer
Technology | Documentation | |
---|---|---|
Swiftlock 2U520 |
Technology |
Swift®lock 2U566
- Formualted to bond lauan to FRP
- Medium open time
- Pigment blue for production visability
Technology | Documentation | |
---|---|---|
Swiftlock 2U566 |
Technology |
Swift®lock 9053
- High green strength for hard to bond FRP
- Resists edge lift
- Five or six layer composite wall builds
Technology | Documentation | |
---|---|---|
Swiftlock 9053 |
Technology |
Swift®Lock HL 9647
- Reactive Olefine with excellent performance for assembly UPP parts
Technology | Documentation | |
---|---|---|
SwiftLock HL 9647 |
Technology |
Swift®Melt HM-1487
- Trunk/carpet lamination PSA with good hot tack, very good shear strength, and high heat resistance
Technology | Documentation | |
---|---|---|
SwiftMelt HM-1487 |
Technology |
Swift®tak 49404
- Formulated to seal wall asssemblies
- Paint roller application
Technology | Documentation | |
---|---|---|
Swifttak 49404 |
Technology |
Swift®Tak L 52/012
- 2K solution
- Drying is not needed
- Excellent performance for bonding Untreated PP
Technology | Documentation | |
---|---|---|
Swift®Tak L 52/012Used for trunk lamination |
TechnologyPSA | Water-based |
Swift®Therm 2003
- High Heat resistance APAO suitable for pre-applications
Technology | Documentation | |
---|---|---|
Swift®Therm 2003Used for trunk lamination and attachments and assembly processes |
TechnologyHot Melt | Thermoplastic |
Swift®Therm 2103
- Long open time and high heat resistance APAO suitable for "on line" processes
Technology | Documentation | |
---|---|---|
Swift®Therm 2103Used for ) and trunk lamination interior trim laminations (door panels, central console |
TechnologyHot Melt | Thermoplastic |
Swift®Therm 2699
- Hybrid APAO hot melt with superb heat resistance bonding Polar and Non Polars
- Suitable for pre-applications
Technology | Documentation | |
---|---|---|
Swift®Therm 2699Used for ) and trunk lamination interior trim laminations (door panels, central console |
TechnologyHot Melt | Thermoplastic |
Swift®therm 2H740
- Spray grade
- Web-over application
- Fast set and flexible
Technology | Documentation | |
---|---|---|
Swifttherm 2H740 |
Technology |
Swift®Therm HL 6612
- High performance Polyamide with short open time for making attachments
Technology | Documentation | |
---|---|---|
SwiftTherm HL 6612 |
Technology |
Thermonex® 063-XX (series)
- Market Reference
- Gold Solution
- Best processability with highest performance
Technology | Documentation | |
---|---|---|
Thermonex® 063-XX (series)Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyPolyurethane Dispersions | Water-based |
Thermonex® 080-XX (series)
- Especialy designed solution for Flocking applications
Technology | Documentation | |
---|---|---|
Thermonex® 080-XX (series)Used for flocking applications |
TechnologyPolyurethane Dispersions | Water-based |
Thermonex® 115-02
- A cost effective solution with a great performance
- Silver Solution
Technology | Documentation | |
---|---|---|
Thermonex 115-02 |
Technology |
Thermonex® 3428-XX (series)
- Especially designed solution for Headliners lamination processes
Technology | Documentation | |
---|---|---|
Thermonex® 3428-XX (series)Used for interior trim lamination of headliners |
TechnologyPolyurethane Dispersions | Water-based |
Thermonex® 3820-XX (series)
- The specialist for the ABS-PVC combination
- Gold Solution
Technology | Documentation | |
---|---|---|
Thermonex® 3820-XX (series)Used for interior trim laminations (intrument panels, door panels, central console ) |
TechnologyPolyurethane Dispersions | Water-based |
Thermonex® Hardener 004
- Water based reliable hardener
Technology | Documentation | |
---|---|---|
Thermonex® Hardener 004Used for hardener for any thermonex® solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Thermonex® Hardener 006
- Water based reliable hardener
Technology | Documentation | |
---|---|---|
Thermonex® Hardener 006Used for hardener for any thermonex® solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
Thermonex® Hardener 007
- High curing speed water based hardener
Technology | Documentation | |
---|---|---|
Thermonex® Hardener 007Used for hardener for any thermonex® solutions |
TechnologyCatalyst & Thickeners | Reactive Chemistry |
TL 0587
- 2K PU potting material with good flexibility
Technology | Documentation | |
---|---|---|
TL 0587Used for general potting / encapsulation |
TechnologyPU | PU |
TS820
- Low odor 2K Acrylate adhesive suitable for general bonding with excellent impact resistance
- Suitable for cell bonding within batteyr modules
Technology | Documentation | |
---|---|---|
TS820Used for general bonding, battery cell to module base |
TechnologyMMA | Reactive Chemistry |
TS820FR
- Flame retardant, low odor, excellent shear and peel strength
Technology | Documentation | |
---|---|---|
TS820FR |
Technology |
TS820L
- Low odor structural, excellent shear and peel strength
Technology | Documentation | |
---|---|---|
TS820L |
Technology |
TS956
- 2 Part PU suitable for bonding dis-similar materials including plastics, as ecountered in plastic liftgates and a variety of exterior trim applications
Technology | Documentation | |
---|---|---|
TS956Used for structural bonding of dis similar materials |
TechnologyPU | PU |
U340
- High Speed
- High Strength
- Great on multiple surfaces
Technology | Documentation | |
---|---|---|
U340Used for automotive, electronics and general assembly |
TechnologyReactive Chemistry | UV Cure Structurals |
U345
- High Strenth
- Hgh flexibility
- Good on multiple surfaces
Technology | Documentation | |
---|---|---|
U345Used for automotive, electronics and general assembly |
TechnologyReactive Chemistry | UV Cure Structurals |
WC2309
- 1K Heat cure epoxy provides superior bonding of aluminum body structures
Technology | Documentation | |
---|---|---|
WC2309Used for structural bonding of aluminum |
TechnologyEpoxy | Epoxy |
Contact a Specialist
We're here when you need us, every step of the way.